bing tracking image
  1. RV Roof Repair
  2. LaSalle Bristol
  3. Sealant
  4. White
  5. Non-Sag
  6. Self-Leveling
LaSalle Bristol XTRM Universal Non-Sag Sealant for RVs - White - 10.1 oz - Qty 1

LaSalle Bristol XTRM Universal Non-Sag Sealant for RVs - White - 10.1 oz - Qty 1

Item # 344270341437-1
Our Price: $23.47
RV Roof Repair
Shipping Weight: 0.03 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Seal the roof membrane edges and vertical surfaces of your RV with this non-sag sealant. Solvent-based formula works with aluminum, glass, and all roof membranes, and it doesn't require primer. Remains flexible for RV travel. Great Prices for the best rv roof repair from LaSalle Bristol. LaSalle Bristol XTRM Universal Non-Sag Sealant for RVs - White - 10.1 oz - Qty 1 part number 344270341437-1 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (46)
  • Q & A (0)
  • Photos

LaSalle Bristol RV Roof Repair - 344270341437-1

  • Sealant
  • White
  • Non-Sag
  • Self-Leveling
  • LaSalle Bristol
  • 10.1 oz

Seal the roof membrane edges and vertical surfaces of your RV with this non-sag sealant. Solvent-based formula works with aluminum, glass, and all roof membranes, and it doesn't require primer. Remains flexible for RV travel.


Features:

  • Sealant seals the roof membrane edges and vertical surfaces of your RV
    • Adheres to aluminum, brass, steel, glass, mortar, PVC, EPDM, TPO, and TPV
    • Non-sag means it won't run or drip
    • Can be used on vertical, slanted, or uneven surfaces
  • Solvent-based formula provides an extra-strong, flexible seal
    • Doesn't require primer
    • Remains flexible for the movement of RV travel
  • Longer dry time is best for DIY - 1 to 2 hours, then ready for the road
    • Applies with a standard caulking gun
    • Can be painted once cured
  • White color matches your RV


Specs:

  • Coverage: 30' at 1/4" bead
  • Shelf life: 18 months
  • Quantity: (1) 10.1 oz tube


RV Sealant - Non-Sag vs Self-Leveling

The kind of sealant you apply to your RV is important. To determine the type of sealant you need for your application, you will want to consider what it is you are sealing and where it is on your RV.


Self-leveling sealant is designed to level out as you apply it. The thick liquid slowly flows into a level position as gravity takes effect. This is particularly useful when sealing flat surfaces, like around a roof vent, AC, or skylight. As you apply the sealant, gravity will cause it to settle into an even line, giving you a clean, low-profile look.


Non-sag sealant is designed to retain its shape as you apply it. The consistency of the liquid is thick but malleable enough to be easily applied without causing sagging or slumping. This is useful when sealing vertical surfaces, such as the edges of a wall, window, or vent. As you apply the sealant, it will harden just enough to keep the liquid from drooping, giving you a clean, even look.



270341437B LaSalle Bristol XTRM Universal Non-Sag Sealant - 10.1 oz - White - Qty 1





Customer Satisfaction Score:


Customer Reviews

LaSalle Bristol XTRM Universal Non-Sag Sealant for RVs - White - 10.1 oz - Qty 1 - 344270341437-1

Average Customer Rating:  4.5 out of 5 stars   (46 Customer Reviews)

Seal the roof membrane edges and vertical surfaces of your RV with this non-sag sealant. Solvent-based formula works with aluminum, glass, and all roof membranes, and it doesn't require primer. Remains flexible for RV travel.

by:

Product demonstrated good adhesion to the van roof as well as the plastic fan housing. Tile will tell.etrailer.com service staff , in particular Carol and George, picked up the ball that USPS fumbled and immediately resent my order . Unparalleled service !



by:

Stays where you put it, no visible sag. Get the substrate clean (rubbing alcohol) before applying. Worth the high price, but that is the only reason for not giving 5 stars.



by:

Arrived, had a small issue with one product, etrailer resolved it ASAP! It’s all good thanks!



by:

I needed a roof sealant compatible with my rigs PVC roof material. It was easy to find that compatibility information on the etrailer site. Called to talk with Customer Service to confirm and Ian took great care of me on this and other product related questions. Called in the morning, placed the order and it shipped that afternoon. Here in just a couple days. Setting the bar high for customer service and fast shipping in my humble opinion.



by:

I did a lot of research and settled on installing a PVC membrane. etrailer made the research and decision process simple and efficient. I really like the videos they have on the product page, it helped with making the decision. I just received the product and waiting for the rain to break and I will install it.



by:

Great product, but the way you ship unreal. That's why I try avoiding buying from you. You start with UPS which get the item here to my local postal distribution center in 2 days then I have to wait another 3 days to get the item delivered by USPS... Just ship with UPS all the way and get us the item we want quickly.. no waiting....Shame on You etrailer...



by:

great product. applies easily and smooth. no leaks since applied a year ago. etrailer is the best place for all your needs.



by:

I was happy with the prompt service and the quality of the products.



by:

The product(s) came quickly, I am just finishing up some repair items and then the new roof membrane will be installed. Ordering, customer service, shipping, follow up were all excellent.. so far so good doing business with eTrailer and Bailey has been very helpful.



by:

This stuff works very well. This is my second tube of this caulk. Great to seal leaky seams in an old roof, after removing the old caulk.

Customer service at etrailer is excellent.

My experience is that etrailer always has the hard-to-find items that I really need to keep the old RV in good shape.



by:

Received my order today as promised.Well packed and everything looked good.Will write another review when I get back to Canada and can install the various parts.Great service from this supplier.



by:

Very easy to use and does a great job.



by:

The package was at my door when I went home for lunch.
Great service!!!!!!



by:

Great product and easy to use.



by:

Really good sealant.



by:



by:

Used a little bit to seal up some things worked great!



by:

Easy to work with.



by:



by:



by:



by:

I got what I ordered



by:



by:



by:


25
46
Show More Reviews

See what our Experts say about this LaSalle Bristol RV Roof Repair

  • Recommended 19ft Wide Complete Awning Kit
    Yes, we have exactly what you need with the Solera 12V XL Power RV Awning - 19' Wide - Extra-Long 9'8" Projection - Black Fade # LCV000334966-362243 or White Fade # LCV000335007-362241. The only other items you'll need will be a some additional wire to run from the awning to your power source, some heat shrink butt connectors to splice your wiring together, some ring terminals or spade terminals to connector to your power source, and some butyl tape # AL28FJ and some non-sag sealant #...
    view full answer...
  • Replacement Unit For A Furrion FWH09AFA RV Tankless Water Heater
    The FWH09AFA just refers to the main unit of the Furrion RV Tankless Water Heater # FR93FR, not including the access door. Realistically if the unit is the only problem then I would just only order it and reuse your current access door. You'll have to scrape off the sealant and butyl tape that was used to secure the door and unit to the trailer. I typically use some composite pry tools # PT73HJ to scrape this off without scratching the wall of the trailer and ruining the paint job. You'll...
    view full answer...
  • Recommended Replacement Vent Lid And Sealant For An RV Roof Membrane
    Depending on the vent there are going to be some different style lids. That being said, if your vent is 14" x 14" then you can use the MaxxAir UniMaxx Universal Replacement Lid # MA00-335001 regardless of the vent brand/style. This replacement lid includes brackets that you can bolt or rivet in place to mount the new lid and get your vent back in working order. As for the roof, if you're just wanting to cover over any seams/gaps then you'll just need to use some self-leveling sealant...
    view full answer...
  • Recommended Sealant For A Replacement Door Handle Hardware Kit
    Since the Replacement Hardware Kit for Stromberg Carlson Lend-A-Hand # 1091 is going to be mounted on a wall you would want to use non-sag sealant to prevent any water from getting in between the hardware and trailer wall. We have a variety of colors to match your trailer: White # 344270341437-1 Black # AL53KV Gray # AL33KV Almond # AL43KV I also recommend using some butyl tape # AL28FJ as this will spread through the threads of the mounting screws to form a protective barrier from...
    view full answer...
  • Troubleshooting A Furrion RV Microwave That Doesn't Vent Well
    To find out why the Furrion Over the Range RV Convection Microwave # FMCM15SS isn't properly venting you'll need to remove it from the wall and check the ductwork running from the microwave to the outside of the trailer. These ducts can get clogged up over time and prohibit air flow causing the issues that you're currently facing. A majority of the venting process is done with the rear vent and not the front one that you were referring to. Another possibility is that you do not have any...
    view full answer...
  • Recommended Replacement For An Atwood G6A-7 RV Water Heater
    At this point you'd be much better off replacing the unit entirely, but newer units are a bit smaller than the prior models so you'll likely need to do a bit of framing to fill in the gaps and properly mount the new unit. Tankless systems are much more efficient and can provide hotter water for much longer than their tanked counterparts. For a bit of perspective the G6A-7 has an 8,800btu rating and will give you roughly 12 galls of hot water per hour. A tankless unit like the Furrion #...
    view full answer...
  • Replacement Options For An Atwood G6A-6E RV Water Heater
    Most likely you will need to still have to do a bit of modification to connect your water and gas lines to any new water heater since manufacturers do not follow any standards for inlet/outlet placement. The best replacement option for your Atwood G6A-6E is going to be the Furrion RV Tankless Water Heater # FR98SR. That being said, it has a 19-3/16" depth so it may take up more space than you can afford. If this is the case then the next best option is going to be the Fogatti RV Tankless...
    view full answer...
  • Recommended Slide-Out Awning for 2015 Sanibel 5th Wheel Trailer
    You are correct that the Solera 14' Slider (Slide-Topper) in Black w/ Black Hardware # LCV000168110 or white # LCV000163301 is the correct fit for the measurements you gave. This fits measurements from flange to flange of 158 to 163-3/4 inches. This comes with all the hardware needed to install except for the Butyl tape like # 344270341411-1 or silicone sealant like # 344270341437-1. I've attached some videos of the installation to assist. You will want to have a second set of hands...
    view full answer...
    Image 1 for
  • Recommended Replacement For An Atwood G6A-7E RV Water Heater
    Water heaters have dropped down in width a bit since the G6A-7E so you will need to make some modifications to the opening for the water heater. That being said the Furrion RV Tankless Water Heater # FR68SR would be a perfect replacement option. It is a tankless design with a Vortex system that mixes hot and cold water to eliminate fluctuations and reduce the risk of hot water scalding. The wall thermostat will allow you to set your water temperature to a specific degree as well. Like...
    view full answer...
  • Ratings For LaSalle Bristol XTRM Universal Non-Sag Sealant
    This is exactly the type product to use for sealing a roof seam on an RV, it is designed to seal the roof membrane edges and vertical surfaces. I suggest the # 34427034145-1 for a self-leveling option with skylights, vents, and other horizontal surfaces of your RV. The manufacturer of LaSalle Bristol XTRM Universal Non-Sag Sealant for RVs, # 344270341437-1 does not list a UV rating only that it is water resistant with a shelf life of 18 months. As with most sealants, they do not have warranties...
    view full answer...
  • Is There A Direct Replacement Available For An Atwood G6A-8E RV Water Heater
    Since Atwood went out of business back in 2016 there are no longer any "direct" replacements available for their water heaters. Dometic bought their water heater line and slowly cut away every model so we're left trying to find the best alternative, which is now tankless water heaters like the Furrion RV Tankless Water Heater # FR93FR. The dimensions I'm seeing for the Atwood G6A-8E show 12-1/2" H x 16" W x 18" D, so I recommend going with the 16" x 18" Door # FR48SR to ensure your cutout...
    view full answer...
  • Recommended RV Water Heater Replacement For A 2002 Fleetwood Bounder Motorhome
    There isn't a "direct" replacement for the Atwood GC10A-3E RV water heater but we do still have an option for you with the Furrion RV Tankless Water Heater # FR98SR. Motorhome's typically have a special door for their water heater that matches the color of the motorhome, which usually can't be used with another model water heater because of how they mount. If the door has its own mounting flange then you might be able to get away with pulling it off and reinstalling it with the # FR93FR,...
    view full answer...
  • 2013 Jayco Swift SLX Power Inlet Hatch Swap to a TwistLoc Style
    The Furrion 30 Amp Power Inlet part # 431861 is designed to fit a 2 1/2" hole (see Photo). With your hole being 5/16" larger than that it will be close but will work without any issues. you will only have just over an 1/8" of extra hole all the way around and the mounting holes for it are well outside of that. Be sure to use a good sealant like the LaSalle Bristol XTRM Universal Non-Sag Sealant part # 344270341437-1 to ensure you don't have any leaks to deal with.
    view full answer...
  • Installation Recommendations For When Your New Water Heater Is Smaller
    As technology advances the size of things, including RV water heaters, have all shrunk so you'll have to do some framing to mount a new unit like the Dometic RV Water Heater # DMC74FR in place. You can use some 2 x 2's to connect to the frame of the trailer and then frame in a hole for the new unit to mount to. From there you can cover the gaps with some stained or painted plywood and then get a larger access door that will cover the original cutout hole. You'll want to use some butyl...
    view full answer...
  • How To Install Gutter Extensions On A 2014 Jayco Jay Flight Swift SLX 154BH
    I can't say for sure which gutter extensions we used on your 2014 Jayco Jay Flight Swift SLX 154BH, but the installation for the RV Extended Rain Gutter Spouts # 372655-PW-A are very simple. You would just need to cut back some of the caulking around the gutter and remove a screw or two so that you can peel a couple inches of the gutter away from the wall to slip the flat rectangle portion of the extender behind the gutter and then press the gutter back up against the wall and screw it...
    view full answer...
  • Recommended RV Water Inlets For A 2005 Exiss Horse Trailer
    Hey Lagina, If you're just looking for a water inlet then we have single (city water or potable water) or dual inlet options available. For a gravity fill water tank inlet you can use # A01-2003VP (white) or # A01-2003BKVP (black). We also offer lockable versions so others can't mess with your water inlets # A01-2002VP (white) or # A01-2002BKVP (black). For city water inlets we offer the # A01-0170LFVP (white) and # A01-0169LFVP (black) with surface mount flanges. For recessed flanges...
    view full answer...
  • Recommended Replacement Water Heater for an Atwood G6A6
    Hey Bruce, I recommend going with the Furrion RV Tankless Water Heater # FR48SR to replace your Atwood G6A6 water heater. This water heater has a 60,000 btu rating which is quite the step up from what you have currently, is a tankless unit so it'll provide hot water on demand (whenever you need it), and will produce up to 144 gallons of hot water per hour. You're also going to want to get some butyl tape # AL28FJ for the unit and access door mounting flanges, as well as some sealant #...
    view full answer...
  • Do Fogatti Tankless Water Heaters Come With Trim Kits To Cover Larger Holes
    Hey Rodney, The Fogatti RV Tankless Water Heater # LSB44FR unfortunately does not come with a trim kit to fill in the excess gap left behind from an old larger Atwood model. Instead I recommend going with a Furrion unit for a larger door and better quality performance. Furrion's units come with the following door sizes: 16" x 16" # FR98SR 16" x 18" # FR48SR 18" x 18" # FR68SR I've attached a video below where Jake had to fill in the gap from a larger unit to help give you a better...
    view full answer...
  • Is The Surco Exterior RV Ladder A Fit For A 1999 Jayco Eagle 283G
    The exterior ladders that we offer, like the Surco Exterior RV Ladder # SP502L you referenced, are all universal-fit designs that can be cut to fit. To ensure that this would be the correct size you'll want to measure from the starting point of the ladder near the ground to the top of the motorhome and then add an extra 8" for the bend that sits above the roof. If you find you have a larger measurement than 76" then you'll likely need to use a longer option like the Stromberg Carlson Exterior...
    view full answer...
  • Recommended Furrion Water Heater Replacement Door For An 18 x 14-3/4 Opening
    Yes, the Furrion RV Tankless Water Heater # FR93FR is my recommendation for replacing your trailer's Atwood water heater. The door you'll need to cover your 18" x 14-3/4" opening is the Replacement Access Door for Furrion RV Tankless Water Heater - 18" x 16" # FR63FR. The mounting bracket for this replacement door will connect directly to your trailer's wall instead of the water heater, allowing you to easily cover the opening. I do recommend using some butyl tape # AL28FJ and non-sag...
    view full answer...
  • Can The High Pointe Microwave # HP94ZR Be Vented To The Outside
    The High Pointe Over the Range RV Convection Microwave # HP94ZR can be vented outside but you'd need to pick up a bit of ducting and duct tape from your local hardware store to connect the vents on the top of the unit to an exterior vent. If you don't already have an exterior vent then we currently offer one in white # V2111-13 and black # V2111-55. You'll want to pick up some butyl tape # AL28FJ and some non-sag sealant # 344270341437-1 for a waterproof connection to the trailer wall.
    view full answer...
  • Recommended Replacement Water Heater For A 2005 Itasca Spirit
    Hi Brad, To replace your Atwood G6A-8E water heater you'll want the Furrion RV Tankless Water Heater # FR48SR. The industry has been moving towards tankless water heaters and have dropped the size of the water heaters down a bit to minimize the space they require. Tankless water heaters offer a much more efficient and and longer lasting heating option. To put it in perspective the Atwood unit you have is rated for 8,800 BTU's and produces about 7.2 gallons of hot water per hour whereas...
    view full answer...
  • Rough Opening Needed For The Ultra-Fab Locking Multi-Purpose Access Door for RVs
    I went out to the warehouse and measure the Ultra-Fab Locking Multi-Purpose Access Door for RVs # UF48-979010. It's going to require an opening approximately 6" wide by 6" tall due to the beveled in section that allows the door to sit flush in the bracket. I recommend using some butyl tape # AL28FJ around inside of the mounting flange as well as some non-sag sealant # 344270341437-1 to prevent water from leaking in.
    view full answer...
  • Replacement LED Light Options for Peterson 124-A and 124-R Clearance Lights
    Your Peterson 124-A and 124-R lights measure 4-7/8" long x 2-1/4" wide x 1-3/8" thick with mounting hole dimensions of 3-7/8". We do not have any clearance lights that match those dimensions. I also tried locating replacement LED bulbs that would work with your Peterson lights but did not find any that seemed to work. I recommend going with the Peterson Piranha LED Clearance and Side Marker Light # M353R for your 124-R and the Peterson Piranha LED Clearance and Side Marker Light # M353A...
    view full answer...


< Previous
123. . .5



Do you have a question about this RV Roof Repair?


Info for this part was:

Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Edited by:
Amanda M
Employee Zach D
Video by:
Zach D
Employee Shane H
Installed by:
Shane H
Employee Halie H
Written by:
Halie H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.